FleetBoard functions
The FleetBoard vehicle computer allows you to
carry out the following functions:
R
Analyse and calculate the driving style
R
Record journey and rest periods
R
Determine the position of the vehicle
R
Remote readout of the driver card and the
mass storage device of the digital tachograph
R
Send predefined messages from the vehicle
(Home-Call, Service-Call, Event-Call)
R
Send vehicle maintenance due dates to the
maintenance schedule, e.g. remaining dis-
tance for engine and transmission oil
R
Send vehicle fault memory for fast diagnosis
and breakdown assistance (only if the disclo-
sure of data has been agreed to in the service
contract)
R
Send data for the purpose of operational anal-
ysis of the vehicle, e.g. current use and oper-
ating conditions
R
Analyse and evaluate vehicle data via the
Internet
Inserting/removing the FleetBoard
DriverCard
FleetBoard DriverCard
The FleetBoard DriverCard is used to identify the
driver for driver-related evaluation.
Avoid touching the contact surface points of
memory chip
:
with your fingers. Otherwise,
errors could occur when reading memory
chip
:
.
X
Switch the ignition lock to the drive position.
Before beginning the journey/trip:
X
To insert: insert FleetBoard DriverCard
;
into the card slot of the FleetBoard vehicle
computer until it engages.
The lettering and memory chip
:
on the
FleetBoard DriverCard
;
must be face up. If
the FleetBoard DriverCard
;
is inserted
incorrectly, a warning tone sounds.
After the end of the journey/trip:
X
To remove: remove FleetBoard Driver-
Card
;
from the card slot.
Sending a message
With the FleetBoard vehicle computer, you can
send three different messages to headquarters
that have been predefined by headquarters.
X
Switch the ignition lock to the drive position.
i
When the green LED on the FleetBoard vehi-
cle computer lights up permanently, the
FleetBoard vehicle computer is operational.
X
To send a Home or Event-Call message:
press the
Ñ
or
Ò
button on the Fleet-
Board vehicle computer.
A short warning tone sounds over the loud-
speaker. The FleetBoard vehicle computer
generates the data which is to be sent; this
may take a few seconds.
X
To send a Service-Call message/to acti-
vate roadside assistance: press the
Ó
button on the FleetBoard vehicle computer
for approximately 2 seconds.
A short warning tone sounds over the loud-
speaker and the orange LED indicator lamp
flashes. The FleetBoard vehicle computer
generates the data which is to be sent; this
may take some time. Leave the ignition
switched on while the data is being sent. A
short warning tone sounds over the loud-
speaker and the green LED indicator lamp
flashes three times when the message has
been successfully sent. The roadside assis-
tance data is now available to Mercedes-Benz
Service.
X
Switch the ignition lock to position
0.
X
Contact Mercedes-Benz Service (Customer
Assistance Centre or national organisation).
FleetBoard vehicle computer with integrated card reader
191
FleetBoard
Z
Содержание Actros 2017
