Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 301 / 436

X
To activate: press the upper section of the
ë
button.
The indicator lamp in the
ë
button flashes
and the function is preselected.
X
Engage power take-off (
Y
page 341).
The
ë
symbol and an event message
appear in the display. The indicator lamp in
the
ë
button is on and the function is acti-
vated.
X
To deactivate:
X Press the
T
button on the control panel.
X
Press the
¤
button on the instrument
panel.
X Increase vehicle speed to more than
10 km/h.
X
Switch off the ignition.
The
ë
symbol in the display and the indi-
cator lamp in the
ë
button go out.
Raised vehicle level (vehicles for
large-capacity transport)
To improve ride comfort, raise the chassis frame
while the vehicle is in motion.
X
To raise the chassis to the raised driving
level: press the upper section of the
ê
button.
The indicator lamp in the
ê
button and the
¸
indicator lamp in the instrument cluster
light up.
X
To lower the chassis to the normal driving
level: press the upper section of the
ê
button again.
The indicator lamp in the
ê
button goes
out. When the chassis is lowered to the nor-
mal driving level, the
¸
indicator lamp in
the instrument cluster goes out.
Shunting level
Example: raised driving level and shunting level
At shunting level, it is possible to move the vehi-
cle slowly when not at driving level. If the vehicle
is in shunting level, the front and rear axles are
raised above driving level.
The rear axle is raised higher than the front axle.
i
On car transporters, the rear axle is raised
higher than the front axle. This is to prevent
the car transporter from bottoming out to
avoid damage.
If you drive too fast at shunting level, a yellow
event window appears in the on-board com-
puter.
X Stop the vehicle.
or
X
Drive at walking pace.
X
To activate shunting level: press the lower
section of the
þ
button.
The indicator lamp in the
þ
button and the
¸
indicator lamp in the instrument cluster
light up. The on-board computer also shows
the
Shunting level active
event window.
The chassis lowers or rises to the shunting
level.
X
To deactivate shunting level: press the
lower section of the
þ
button again.
The indicator lamp in the
þ
button and the
event window in the on-board computer go
out. The chassis lowers or rises to driving
level. When the chassis lowers to the normal
driving level, the
¸
indicator lamp in the
instrument cluster goes out.
Shunting level is automatically activated if you:
R
lower or raise the chassis manually
R
set a raised or normal driving level
R
press the
T
button on the control panel or
the
¤
button on the instrument panel
Level control
299
Driving mode
Z