and 90 km/h. If a vehicle is detected in front, it
operates in the speed range between 0 and
90 km/h.
If the distance control assistant detects a vehi-
cle in front driving at a slower speed, your vehi-
cle is slowed and the specified minimum dis-
tance selected by you is maintained.
The distance control assistant brakes the vehi-
cle with the continuous brake if:
R
the vehicle exceeds the set speed, including
the set speed tolerance, e.g. on a downhill
gradient
R
a slower vehicle in front is detected
When the continuous brake slows the vehicle,
the
Ã
indicator lamp lights up in the instru-
ment cluster.
The distance control assistant may also brake
the vehicle using the service brake in order to
maintain the specified minimum distance. If the
vehicle in front is no longer detected, e.g. if it
changes lane, your vehicle will accelerate up to
the set speed.
The distance control assistant cannot be acti-
vated or is deactivated automatically if:
R
you are driving slower than 15 km/h on roads
with more than a 10% downhill/uphill gradi-
ent
R
you are driving slower than 5 km/h and a
vehicle in front is not detected
R
you shift the transmission into neutral for
more than approximately 5 seconds
R
you select the reverse gear
R
you deactivate ABS
R
the vehicle is stationary and you leave your
seat
R
the vehicle is stationary and you open the
driver's door
R
for vehicles with air suspension, the chassis is
not within the driving level
R
there is a malfunction in the brake system/
electronic management system
R
the distance sensor initialisation is not yet
complete
If the distance control assistant is deactivated
automatically, a warning tone sounds.
If the distance control assistant cannot be acti-
vated, the on-board computer will display
- - .- km/h
in grey.
The distance control assistant remains activa-
ted if:
R
you decelerate using the continuous brake
R
it decelerates the vehicle using the continu-
ous brake/service brake and you simultane-
ously depress the brake pedal
If your vehicle accelerates and you depress the
brake pedal, the distance control assistant is
deactivated automatically.
Selecting the distance control assistant
X
Press the
é
button repeatedly until the on-
board computer shows the
É
symbol in
grey.
If you change from cruise control to the distance
control assistant and the distance control assis-
tant was activated earlier, the
É
symbol
appears in white in the on-board display. The
distance control assistant is activated. The vehi-
cle adapts its speed to that of the vehicle in
front, but only up to the desired and set speed.
Activating when driving
At speeds below 15 km/h, you can only activate
the distance control assistant if a vehicle in front
has been detected.
X
Drive at a speed above 15 km/h.
X
Select the distance control assistant.
X
Briefly press the
Ñ
button.
The distance control assistant is activated
and the current speed is set.
or
X
Briefly press the
q
button.
The distance control assistant is activated
and the last stored speed is set.
The on-board computer shows the
É
sym-
bol and the set speed in white.
X
Release the accelerator pedal.
The vehicle adapts its speed to that of the
vehicle in front, but only up to the desired and
set speed.
Activating while the vehicle is stationary
When the vehicle is stationary, only activate the
distance control assistant in a traffic jam on
roads similar to motorways and not in urban
traffic. The function is not designed for urban
traffic. When the vehicle is stationary, you can
only activate the distance control assistant if a
vehicle in front has been detected.
280
Driving systems
Driving mode
Содержание Actros 2017
