Clutch actuator in vehicles with power take-off
N4W or N4X
If the transmission-independent power take-off
fails, you can establish or release a rigid con-
nection of the power transmission in power
take-off. When disengaging manually, make
sure power take-off is not under load. Switch
pumps to zero delivery, for example.
You can recognise vehicles with power take-off
N4W or N4X by the external clutch actuator. If
there is a cover plate in this position then the
vehicle is equipped with power take-off N4Y or
N4Z.
X
To engage power take-off manually: apply
the parking brake.
X
Shift into neutral.
X
Switch off the ignition.
X
Take the adapter, wrench, screwdriver and
hammer out of the vehicle tool kit.
X
Remove covering cap
:
with a screwdriver
and a hammer.
X
Place the adapter and wrench at position
2
on the shaft.
X
Turn the wrench to position
4
.
X
Remove the wrench and adapter.
X
Attach covering cap
:
.
X
Start the engine.
X
Press the upper section of the
S
power
take-off switch.
If power take-off is engaged, the
0
acti-
vation status indicator is shown in the display
of the on-board computer. The indicator lamp
in the
S
switch lights up.
X
To disengage power take-off manually:
start the engine.
X
Shift into neutral.
X
Press the lower section of the
S
switch.
X
Apply the parking brake.
X
Switch off the ignition.
X
Take the adapter, wrench, screwdriver and
hammer out of the vehicle tool kit.
X
Remove covering cap
:
with a screwdriver
and a hammer.
X
Place the adapter and wrench at position
2
on the shaft.
X
Vehicles with power take-off N4Y or N4Z: turn
the wrench to position
3
.
or
X
If power take-off is automatically engaged in
advance by the switch in vehicles with power
take-off N4W or N4X: turn the wrench to posi-
tion
4
.
or
X
If power take-off is manually engaged in
advance in vehicles with power take-off N4W
or N4X: turn the wrench to position
3
.
X
Remove the wrench and adapter.
X
Attach covering cap
:
.
X
Start the engine.
If power take-off is disengaged,
/
appears
in the display of the on-board computer and
the indicator lamp in the
S
switch goes
out.
344
Power take-offs
Working mode
Содержание Actros 2017
