Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 148 / 436

vehicle heights for the country you are currently
in.
Set the driving level before pulling away.
It is necessary to raise/lower the chassis to pick
up/set down demountable bodies or semitrail-
ers. If you continue a journey after having
changed the chassis height, it is necessary to
lower/raise the chassis to driving level.
If the yellow
¸
indicator lamp in the instru-
ment cluster lights up, the chassis is not at driv-
ing level. Observe the additional information in
the event window.
Adjusting the level control
The
Level control
menu window is available
on vehicles with air suspension. You can operate
the level control when the vehicle is stationary
or when the vehicle is in motion up to approx-
imately 30 km/h.
Depending on your vehicle's equipment, you
control the function of the level control system
using:
R
the control panel on the driver's seat
(
Y
page 295)
R
the external control panel on the vehicle body
(
Y
page 295)
R
the multifunction key (
Y
page 58)
R
the Truck-App on a mobile device
(
Y
page 112)
R
the on-board computer
X
Using the
u
or
t
button, scroll to
â
operation and maintenance.
X Using the
r
or
s
button, scroll to the
Level control
menu window.
X
Press the
9
button.
The on-board computer displays the input
window.
Example: level control input window
:
Preselection: to raise/lower the front axle
;
Preselection: to raise/lower the entire vehi-
cle
=
Preselection: to set the driving level
?
Preselection: to raise/lower the rear axle
A
Memory position M1 or M2 for chassis
height
X
To raise/lower the chassis: using the
u
or
t
button, select front axle
:
, entire
vehicle
;
or rear axle
?
.
X Press the
r
button to lower the chassis or
the
s
button to raise it. The
¸
indicator
lamp in the instrument cluster lights up.
X
To interrupt/end the raising or lowering
operation: press the
9
button.
X To select the driving level: use the
u
or
t
button to select preselection driving
level
=
.
X
Briefly press the
r
or
s
button.
The chassis is raised or lowered automatically
to the driving level.
When the chassis is at driving level, the
¸
indicator lamp in the instrument cluster goes
out.
X To store the chassis height: raise or lower
the chassis to the desired height.
X
Using the
u
or
t
button, select mem-
ory position M1 or M2 for chassis height
A
.
X Press the
r
button for approximately
2 seconds.
The current height of the chassis frame is
stored under the corresponding memory
position M1 or M2.
146
On-board computer
On-board computer and displays