M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 42 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
E 300 Operator Interface
34
Pressing the "Print" push button once again will command
the squeegee in the selected print station to chop down to
the print position.
This allows the press Operator to easily check and adjust
squeegee pressure prior to printing. Pressing the "Print"
push button a third time will cause the squeegee to chop
back to the raised position and the index table to drop down
to the index position once again.
Setup Mode: On/Off:
As discussed previously, each print station is provided with
a independent print push button located on both the main
operator control panel and each individual print station con-
trol panel. The independent print push button is used to
raise the print carousel during set-up operations and to
command individual print stations to perform one complete
flood/print cycle.
Setup Mode On Print Station Off -
In this mode, pressing the "Print" push button once will
command the print table to raise. Pressing the “Print” push
button a second time will command the print carriage to
chop to the "Print" position. Pressing the "Print” push but-
ton a third time will command the index table to return to the
down position and the print carriage to chop back to the
“Flood” position.
Setup Mode On Print Station On-
In this mode, pressing the "Print" push button will result in
one complete flood, table up, print and table down cycle.
You must have the selected print station "On/Off" toggle
switch in the "On" position on the main control panel.
Double Print: Up/Down:
The next menu selection in the "Options" menu is "Double
Print Up/Down". This menu selection is used to command
the index table to remain in the "Up" position during a dou-
ble print or multi print stroke cycle of any print station. In this
way, the additional time it takes for the index table to drop
and rise between print stroke cycles is eliminated. When this
menu selection is selected to "Down", the index table will
operate in the standard mode during double or multi print
operation, where the index table lowers between print
strokes. (See Fig. 14 at the right)
To access the "Double Print Up/Down" menu, use the
"Arrow" keys to place the flashing frame on the small indi-
cator at the right "Down/Up" displayed on the screen. Now
press the "RETURN/ENTER" key. Each time you press the
"RETURN/ENTER" key the indication it will toggle from "Up"
to "Down".
Figure 14