M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 10 / 176

M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
2
This symbol signifies a possible
imminent danger for life and health
of persons and equipment
Operators.
Non-observance of these
instructions can have serious
health consequences and can
lead to highly dangerous injuries.
This symbol signifies a possible
danger.
Non-observance of these
instructions can lead to light
injuries or damage to the equip-
ment or property.
This symbol gives important
instructions for the proper use of
the equipment.
Non-observance
of these instructions can lead to
equipment failure.
This symbol is used to describe
operating tips or especially useful
information.
This information will enable the
Operator to use all equipment
functions for optimal perfor-
mance.
Organizational Measures:
Equipment operators are responsible to provide personal
protection when operating this equipment. All safety
devices must be checked each day before operation of the
equipment can begin
.
Safety Devices:
Before beginning operation of the equipment, all safety
appliances must be checked for proper operation.
Safety devices may only be removed after.....
1. The equipment is shut down.
2. The electrical power has been dis-connected from the
equipment.
3. In case of delivery of partial components, the Operator
must install safety devices in accordance with regula-
tions.
Exploratory Safety Measures:
The Operator’s Manual must be kept on or near the equip-
ment at all times. All safety and danger notices must be kept
in readable condition at all times.
Training of Equipment Operator’s
Only properly trained Operators may run the equipment.
The competence of personnel who are to operate, maintain,
set-up and shut down the equipment must be confirmed.
Unskilled staff may work with the equipment only when
supervised by experienced equipment Operators.
Equipment Control System:
Never make any modifications to software.
Only experienced Operators may actuate the control sys-
tem.
Safety Measures during Normal Operation:
Operate the equipment only if all safety devices are fully
operational.
Before starting the equipment, check to be sure no-one will
be endangered by the operation of the equipment.
Check the equipment and safety devices at least once per
shift for external or visible damage.
Danger by Electrical Energy:
Work on the electrical system must
be carried out by qualified person-
nel only.
Check the electrical equipment
regularly for any sign of defect or
loose connections.
Electrical enclosures must be kept
securely locked at all times.
Only authorized personnel with a
key are allowed access to electrical
enclosures.
Danger by Pneumatic Energy:
Only personnel with experience with pneumatic power sys-
tems may work with pneumatic components or assemblies.
Before starting any work on pneumatic components or
assemblies,
the compressed air supply must be com-
pletely drained from the equipment to prevent any oper-
ation of pneumatic controls or assemblies.
CAUTION!
i
IMPORTANT!
OPERATING
TIP!
DANGER!
WARNING!
Safety Precautions
Challenger II
mrprint.com