M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 63 / 176

55
PREVENTIVE MAINTENANCE PROCEDURE
CHALLENGER Series II Bulletin No. IX4
Maintenance Point
Frequency Interval
Procedure Information
Check air line lubricator/moisture trap assembly oil level. Add 10 wt. non-detergent oil as needed. Oil should be added
whenever the graduated sight glass indicator displays a half full indication.
Two Times a Week
Tools required: 1 - Standard blade screw driver
1 - Non-detergent oil (M&R Part No.
7017000)
CAUTION!
To prevent possible injury
to personnel and/or damage to the
equipment, lock out and tag the electri-
cal service and compressed air supply
to this equipment. Refer to pages 55
and 56 of this manual for information
regarding lock out/tag out procedures.
CAUTION!
The frequency of the following preventive maintenance procedure is
based on a 8 hour daily production shift or 40 hour work week.
2. To add oil, use the standard blade screw driver to remove
the fill plug at the top of the lubricator assembly. Add 10 wt.
non-detergent oil (M&R Part No. 7017000) as needed to
bring oil to proper level. The glass indicator will indicate full
when the oil level is approximately 1/8” from the top of the
glass indicator. Replace the oil fill plug and tighten securely.
NEVER OVERFILL THE LUBRICATOR RESERVOIR!
1. Check the current oil level on the glass indicator. If the oil
level indicated is less than half full, you will need to add oil.
Half full at this point
Oil Fill Plug
Full at this point