M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 73 / 176

PREVENTIVE MAINTENANCE PROCEDURE
CHALLENGER Series II Bulletin No. IX9
Maintenance Point
Frequency Interval
Procedure Information
Drain accumulated water and moisture from your compressor receiver tank and the press air manifold located on the
bottom of the indexer chassis.
Monthly
Tools required: 1 - 7/16” Box end 12 point wrench
1 - 3/8” open end wrench
65
The frequency of the following preventive maintenance procedure is
based on a 8 hour daily production shift or 40 hour work week.
CAUTION!
To prevent possible injury
to personnel and/or damage to the
equipment, lock out and tag the electri-
cal service and compressed air supply
to this equipment. Refer to pages 55
and 56 of this manual for information
regarding lock out/tag out procedures.
CAUTION!
1. Using the wrench, remove the press manifold drain plug
on the bottom of the indexer chassis and alternate manifold
by turning counterclockwise. Allow any accumulated water
and moisture to discharge from the manifold.If moisture is
discovered in the press manifold, check your compressor
and/or refrigerated air chiller unit.
2. Replace the manifold drain plug and tighten securely. DO
NOT OVER TIGHTEN!
Manifold Drain Plugs