M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 46 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
E 300 Operator Interface
38
You will note that across the bottom of the display screen is
a dark bar with
“TIMERS”, “Midas/MStamp”, “TESTS”,
“MPR”, “Manual Glue”, “Pg Dwn” and “Pg Up” . Except
for “Midas/MStamp” and “Pg Dwn” and “Pg Up” these
functions work as explained previously. “Midas/MStamp”
is used to manually activate the M&R Midas or Mega Stamp
foil application system. Simply press the button below
“Midas/MStamp” which normally would be “OPTIONS” , to
display the Midas/MStamp menu selection. (See Fig. 18 at
the right)
The first menu selection for the Mega-Stamp is “Head
Location”. This menu selection is used to enter the print sta-
tion number where the Mega-Stamp unit is located. To enter
the print station location, use the “Arrow” keys to place the
flashing frame on the indication at the right. Then press the
number key or keys which represent the print station loca-
tion. Now press the “Enter” key.
The next menu selection is “Down Time”. The “Down Time”
is used to enter the time which the Mega-Stamp is in the
down position applying force to the foil application on the
pallet. The maximum down time which may be entered is 10
seconds. The minimum down time is 1 second. Use the
“Arrow” keys to place the flashing frame on the indication at
the right. Then press the number key or keys which repre-
sent the desired down time. Now press the “Enter” key.
The next menu selection is “Manual Test”. Manual Test is
used to manually test the operation of the Mega-Stamp unit.
Use the “Arrow” keys to place the flashing frame on the
“Off” indication at the right. Now press the “Enter” key. The
indication will change to “On” and the Mega-Stamp will per-
form one cycle. Each time you press the “Enter” key, the
Mega-Stamp will perform one manual cycle.
Midas Loader -
The first menu selection for the Midas Loader is “Head
Location”. This menu selection is used to enter the print sta-
tion number where the Midas Loader unit is located. To
enter the print station location, use the “Arrow” keys to
place the flashing frame on the indication at the right. Then
press the number key or keys which represent the print sta-
tion location. Now press the “Enter” key.
The next four menu selections are “Both Safe”, “Megastamp
Down”, “Midas Tbl in Pos” and “Midas AutoCycle”. These
menu selections are used to display the current status of the
input and output signals form the MegaStamp and the
Midas units. These selections are used as indicators only
and are not adjustable in any manner.
Figure 19
Figure 18