M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 40 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
E 300 Operator Interface
32
Flash:
The next menu item in the "OPTIONS" menu is "FLASH".
This menu item provides a visual indication which alerts the
system Operator as to which print heads are currently
selected for "Flash Cure" operation.
Print heads are displayed from the left to the right of the dis-
play screen starting with the highest number print head.
Displayed below each print head you will note either a "-"
indicating that print head is currently selected for print oper-
ation, or the letter "F" indicating that the print head is select-
ed for flash cure operation. To change the indication from
flash to print operation and back again, use the
"FRONT/REAR" stop toggle switches located on the Main
control console to select the desired operation of that par-
ticular print head. To select the print head for flash cure
operation, place the toggle switch in the "FRONT" stop
position, then, using the "ARROW" keys, place the flashing
frame under the letter "E" in the word "ENTER" to the right
of the word "FLASH", and press the "ENTER" key. In addi-
tion, the "SINGLE/DOUBLE" toggle switch must also be
selected, or the print head will not operate in either print or
flash operation. (See Fig. 11 at the right)
Double Switch -
The third sub-menu selection in the "Options" menu is
"Double Switch". Double Switch is used to command indi-
vidual print stations to perform multiple flood and print
strokes, up to a maximum of 9. To select print stations for
"Double Switch" operation, use the "ARROW RIGHT" key to
place the flashing frame on the "Double/Multi" icon at the
right of the message screen, then press the
"RETURN/ENTER" key. Each time you press the
"RETURN/ENTER" key, the icon indication will toggle from
"Double" to "Multi" and vice versa. (See Fig. 13 at the right)
The L.C.D. message screen will display the "Multi-Print"
menu screen. The next line displays the print stations from
left to right as 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, and 1.
The last line displays a numeric indicator under each print
station number which indicates if the print station is operat-
ing in "normal" (1) single stroke mode or in "Double" mode
(2 print strokes) or "Multi" mode (3 through 9 print strokes).
In figure 12 at the right all print stations have been set to
"Double" mode and will print 2 flood/print cycles. To select
print stations for "Multi-Print" operation, use the "ARROW"
keys to place the flashing cursor on the number indication
which represents the print station. Now press the appropri-
ate number key (3 through 9) to enter the number of print
cycles for that print station.
Figure 12
Figure 11