M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 44 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
E 300 Operator Interface
36
Glue Applicator:
The "GLUE APPLICATOR" sub-menu provides control
adjustments for the optional M&R Annamister Automatic
Adhesive Application system. The available parameters are
"Spray 1 Revltn Only:" ,"Spray Every: Revolution" "Front
Delay", "Front Duration", Rear Delay", "Rear Duration",
"Revolution #:" and "Pallet #:".
To access the first menu item, "Spray 1 Revltn Only" press
the "ARROW DOWN" key one time. Now press the "ARROW
RIGHT" key one time. (See Fig. 16 at the right)
The flashing cursor will now be positioned at the "ON/OFF"
indication. To activate "Spray 1 Revltn Only" press the
"ENTER" key one time. The indication will now display
"ON". When "Spray 1 Revltn Only" is "ON", the M&R
Annamister will dispense adhesive on all pallets for one rev-
olution only. A revolution is defined as one complete cycle of
all printing pallets. This control provides a convenient man-
ner in which to automatically apply adhesive to all printing
pallets at the beginning of a print run.
Press the "ARROW DOWN" key one time, then press the
"ARROW RIGHT" key one time to access the "Spray Every
Revolution" sub-menu item. The "Spray Every Revolution"
menu item permits the system Operator to program the
M&R Annamister to apply adhesive to the printing pallets
based on the number of revolutions of the press. Remember
that a revolution is defined as one complete cycle of all
printing pallets. The value may be set for a minimum of "0",
or a maximum of "99". As an example, if the indication is set
for "5", then the M&R Annamister system will automatically
apply adhesive to all printing pallets every fifth revolution of
the index system. To change the indication, use the numer-
ical keys to enter the desired number of revolutions, then
press the "ENTER" key one time. Your selection is now
saved in the PLC memory.
Press the "ARROW DOWN" key one time, then press the
"ARROW RIGHT" key one time to access the next sub-
menu item, "Front Delay". This sub-menu item permits the
system Operator to program a start delay time for the front
air valve which operates the two front spray guns. This
adjustment is provided to precisely set the spray gun trigger
cycle to the speed of the indexer when operating the press
in the automatic mode.
The adjustment has a range of between “0.01” second and
“2” seconds delay time. To adjust the “Front Delay” time,
enter the desired time interval using the numerical keys,
then press the
“ENTER” key one time. Your selection is now
saved.
Figure 16