M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 45 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois 37
E 300 Operator Interface
Press the “RIGHT ARROW” key one time to access the
“Front Duration” dwell time. This sub-menu item permits
the adjustment of the time duration in which the front air
valve which operates the front spray gun is activated. This
adjustment, like the
“Front Delay” adjustment described
above, permits the system Operator to precisely set the two
front spray guns to synchronize with the current index
speed. The adjustment has a range of
“0.00” seconds to “2”
seconds. Use the numerical keys to enter the desired time
value, then press the
“ENTER” key one time. Your selection
is now saved in the PLC memory. (See Figure 17 at the right)
The next sub-menu item is “Rear Delay” . This sub-menu
item permits the system Operator to program a start delay
time for the one rear air valve which operates the rear spray
gun. As with
“Front Delay” described previously, this
adjustment is provided to precisely set the spray gun trigger
cycle to the speed of the indexer when operating the press
in the automatic mode. The adjustment has a range of
“0.01” second to “2” seconds delay time.
To adjust the “Rear Delay” time, press the “RIGHT
ARROW” key so that the flashing cursor is located under
the current indication. Now using the numerical keys, enter
the desired delay time, then press the
“ENTER” key. Your
selection is now saved in the PLC memory.
The next sub-menu item is “Rear Duration” . This sub-menu
item permits the adjustment of the time duration in which
the rear air valve which operates the rear spray gun is acti-
vated. This adjustment, like the
“Rear Delay” adjustment
described previously, permits the system Operator to pre-
cisely set the one rear spray gun to synchronize with the
current index speed.
The next sub-menu item is “Revolution #” . This menu item
is used to provide the system Operator with a visual indica-
tion of the current number of revolutions remaining before
the M&R Annamister automatically applies adhesive to the
printing pallets as determined by the Operator’s selection in
the
“Spray Every…” sub-menu item as described previous-
ly. The indication displayed shows a countdown of remain-
ing revolutions. For example, if the selection for
“Spray
Every…” was “20” . Then the indication will begin at “20”
and countdown to “0” at which time the M&R Annamister
system will begin applying adhesive to the printing pallets.
(See Figure 17 at the right)
The next sub-menu item is “Pallet #” . This menu item is
provided as an indication of how many pallets remain until
the end of the current revolution.
Figure 17