M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 41 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois 33
E 300 Operator Interface
Now press the "RETURN/ENTER" key. The number indica-
tion for the print cycles will change indicating the selected
print station will now perform multiple flood/print strokes in
the "Multi-Print" mode. To return a print station to standard
(single) print operation, locate the flashing cursor on the
number indicator under the print station and press the num-
ber "1" key. Press the "RETURN/ENTER" key. The print sta-
tion will now return to standard, single print stroke opera-
tion.
Head Setup:
Each print station is provided with a independent print push
button located on both the main operator control panel and
each individual print station control panel. The independent
print push button is used to raise the print carousel during
set-up operations and to command individual print stations
to perform one complete flood/print cycle. You will note that
the "Head Setup" includes a "Standard/Enhanced" indica-
tion at the right of the message screen. To select either
"Standard" or "Enhanced" mode, use the "Arrow" keys to
place the flashing cursor on the "Standard" or "Enhanced"
indication. Now press the "RETURN/ENTER" key. Each time
you press the "RETURN/ENTER" key, the indication will tog-
gle from "Standard" to "Enhanced" and vice versa. (See Fig.
13 at the right)
In the "Standard" mode, pressing the "Print" push button
will command the index table to raise and the selected print
station to perform one complete flood/print cycle. You must
have the selected print station "On/Off" switch in the "On"
position on the main control panel.
In the "Standard" mode with the print stations "On/Off"
switch in the "Off" position, pressing the "Print" push button
one time will command the index table to raise to the print
position. Pressing the "Print" push button for a second time
will cause the index table to go down.
In the "Enhanced" mode with the print stations "On/Off"
switch in the "On" position, tapping the "Print" push button
momentarily will command the index table to raise and
remain in the raised position. Tapping the "Print" push but-
ton once again will command the index table to lower to the
index position once again. Pressing the "Print" push button
and holding it in will command the index table to raise and
the selected print stations to perform one complete
flood/print cycle.
In the "Enhanced" mode with the print stations "On/Off"
switch in the "Off" position, pressing the "Print" push button
momentarily will command the index table to raise and
remain in the raised position.
Figure 13