M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 48 / 176

Challenger II
mrprint.com
May 2005
M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
E 300 Operator Interface
40
Now press the "ENTER" key and hold it down until the
desired numerical value, either plus or minus is displayed.
Then release the "ENTER" key. Your selection is now pro-
grammed into the Servo Drive Offset.
Press the buttons below “Pg Dwn” or “Pg Up” to scroll
down through the menu item.
OILER -
The next sub-menu item is “OILER”. This sub menu item
makes the periodic lubrication of the index drive assembly
convenient and effortless. The first parameter “OIL EVERY
INDEXES” allows the system Operator to enter a number
from “0” up to “999”. The index lubrication system will now
dispense oil to the indexer drive assembly every so many
cycles based on the value entered. For example, if you enter
the number 80, which is the value selected at the factory, the
lubrication system will automatically dispense oil to lubricate
the indexer every 80 cycles. To change the value, use the
“ARROW “ keys to place the flashing cursor on the value,
then use the numerical keys to select the value, then press
the “ENTER” key. (See Fig. 22 at the right)
“INDEX No.” is used as a visual indicator to advise the sys-
tem Operator how many index cycles remain before auto-
matic lubrication will take place.
“MANUAL OILER” permits the lubrication of the index sys-
tem manually. To activate the “MANUAL OILER”, use the
“ARROW” keys to place the flashing cursor on the
“ON/OFF” indication, and press the “ENTER” key. This
action will activate the lubricant pump resulting in the man-
ual lubrication of the index system.
TESTS -
The next menu item is the "TEST" menu item. In the
"TESTS" menu item there are six sub-menu selections
which are "Panel Test", "Proximity's Test", "Motion Card
Test", "Servo Drive Test", "Servo Motion Card History" and
"Others" tests. The "TESTS" menu provides an on-board
self diagnostic program which gives the system Operator a
visual indication of the operational integrity of all the prox-
imity switches, toggle switches and push button switches
used in the operation of the M&R Challenger Series II sys-
tem. (See Fig. 23 at the right)
PANEL TEST To access the "Panel Test" sub-menu, press
the arrow keys to place the flashing cursor on the small
arrow to the left of the words "Panel Test", then press the
"Enter" key. The L.C.D. display window will now display a
graphic representation of the Main Control console.
Figure 23
Figure 22