M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 71 / 176

PREVENTIVE MAINTENANCE PROCEDURE
CHALLENGER Series II Bulletin No. IX8
Maintenance Point
Frequency Interval
Procedure Information
Clean away old grease from the inside of the “U” shaped registration forks and each of the registration cam follower
bearings on the index table. Use a small painters brush to apply a fresh coat of white lithium grease (M&R Part No.
7018017) to the inside of the “U” shaped registration forks and around the outer race of each registration cam follower
bearing.
Monthly
Tools required: 1 - M&R Part No. 7018017 White Lithium
Grease
1 - Small Painter’s Brush
63
The frequency of the following preventive maintenance procedure is
based on a 8 hour daily production shift or 40 hour work week.
CAUTION!
To prevent possible injury
to personnel and/or damage to the
equipment, lock out and tag the electri-
cal service and compressed air supply
to this equipment. Refer to pages 55
and 56 of this manual for information
regarding lock out/tag out procedures.
CAUTION!
1. Using a suitable wiper or cloth rag, remove old grease
from the inside “U” surface of the registration forks and out-
side race of the registration cam follower bearings. Using a
small painters brush, apply white lithium grease to the inside
“U” of the registration forks and outside race of the registra-
tion cam follower bearings. Do not apply too much grease.
Only a small amount will be required. Excessive application
of grease will only serve to attract lint and other air borne
contaminant’s to the surfaces.
Apply white lithium grease here