M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 11 / 176

M&R Printing Equipment, Inc. - Glen Ellyn, Illinois
3
All pneumatic piping and/or hoses must be checked at reg-
ular intervals for signs of wear or failure.
Maintenance & Trouble Shooting:
Preventive maintenance must be performed at regular inter-
vals as described in the Operator’s Manual.
Equipment operator’s must be informed before any preven-
tive maintenance can be performed.
All power systems such as electrical, pneumatic,
hydraulic or mechanical must be dis-connected and
locked out before preventive maintenance may begin.
Structural Modification of the Equipment:
Modifications of equipment are specifically not allowed with
out written authorization from M&R Printing Equipment, Inc.
Cleaning of the equipment:
Clean away all ink or other contaminant’s at the end of each
day.
Equipment Noise:
Under normal operating conditions as described under
Defined Purpose, this equipment will not produce sound
above the level of 65 db. Depending on local conditions, a
higher continuous sound level may result that could lead to
hardness of hearing. In this case, the operational staff must
wear appropriate safety clothing or protection.
CAUTION: The information con-
tained in this Operator’s Manual
has been provided to eliminate
problems from occurring. Be sure
to read through this Operator’s
Manual fully before operating your
press.
There are numerous safety features
utilized in the operation of this
equipment.
Please be sure you
know the location of these safety
devices and how they operate
before attempting to operate this
equipment.
SAFETY FEATURES -
1. All equipment is provided with either a safety bar, foot
switch, yellow safety cords, infrared safety beam, yellow
floor mats or hand switch to stop the equipment. Please
know the type on your equipment and its location and func-
tion before operating.
NEVER ATTEMPT TO BY-PASS OR
DEFEAT ANY SAFETY DEVICE OR APPLIANCE. IN THE
EVENT THAT ANY OR ALL SAFETY DEVICES ARE NOT
OPERATING OR FUNCTIONING PROPERLY, DO NOT
ATTEMPT TO OPERATE THIS EQUIPMENT!
2. Safety guards have been provided to protect the opera-
tor from all moving parts. Please do not remove these
Safety Guards any time the equipment is in operation.
3. This Operator’s Manual includes information regarding
the proper preventative maintenance procedures. When
ever personnel are performing preventative maintenance
procedures,
be sure that all electrical and pneumatic
power is disconnected from the equipment, and that
disconnects are locked in the “OFF” position.
4. Never work on the table surface under the print stations
unless the power
“ON/OFF” switch is placed in the “OFF”
position.
OPERATOR SAFETY INSTRUCTIONS -
All industrial equipment, including screen printing equip-
ment, requires a combination of high electrical, pneumatic,
hydraulic or mechanical power for operation. In addition,
automatic screen printing equipment, by its nature, expos-
es operators to parts and assemblies which operate at high
speeds and contain numerous moving parts. As with all
complex industrial equipment, care should be exercised to
carefully observe proper operating procedures and safety
precautions.
Although every effort has been made to design and con-
struct safe, dependable equipment, it is impossible to fore-
see all circumstances under which this equipment may be
utilized, or to anticipate all possible combinations of factors
which may cause a hazardous condition or situation. It is
therefore imperative that the equipment Operator, as well as
all other personnel engaged in any phase of the set-up,
operation or preventative maintenance of this equipment
consider safety first an important part of their job.
The following general safety considerations are offered as
an aid to users of M&R Printing Equipment to assist them
in becoming safety conscience.
1. READ THE OPERATOR’S MANUAL before attempting
to lift, move, operate or perform maintenance on any piece
of machinery. Become intimately familiar with all equipment
controls, their locations, their operation and their effect on
equipment function. Keep this Operator’s Manual in a clean
location immediately adjacent to the equipment for a quick
and handy reference.
2. BEFORE ATTEMPTING TO START THE EQUIPMENT
inspect all areas around and adjacent to moving parts for
possible obstructions: tools, rags, crating remnants etc. Be
certain that all Safety Guards, covers, access doors etc., are
properly installed prior to starting operation.
CAUTION!
Safety Precautions
Challenger II
mrprint.com