M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 70 / 176

PREVENTIVE MAINTENANCE PROCEDURE
CHALLENGER Series II Bulletin No. PH5
Maintenance Point
Frequency Interval
Procedure Information
Clean away old grease dirt or lint and apply a fresh coat of white lithium grease (M&R Part No. 7018017) to the inside
“U” shaped index drive capture fork.
Monthly
Tools required: 1 - M&R Part No. 7018017 White Lithium
Grease
1 - Small Painter’s Brush
62
The frequency of the following preventive maintenance procedure is
based on a 8 hour daily production shift or 40 hour work week.
CAUTION!
To prevent possible injury
to personnel and/or damage to the
equipment, lock out and tag the electri-
cal service and compressed air supply
to this equipment. Refer to pages 55
and 56 of this manual for information
regarding lock out/tag out procedures.
CAUTION!
1. Using a suitable wiper of cloth shop towel remove the old
grease from the inside surface of the “U” shaped index cap-
ture fork clevis and outside race of the index cam follower
bearings. Using a small painter brush, apply white lithium
grease to the inside “U” of the capture fork clevis and the
outside race of the index cam follower bearings. Only a small
amount of grease is required. Excessive application of
grease will only serve to attract lint and other air borne con-
taminant’s to the capture fork clevis and cam follower bear-
ing race surface.
Apply oil along cylinder surface on both sides.
Use small brush to apply white lithium grease
on cam follower race.