M&R Challenger II 12 COLOR, Руководство пользователя

Страница: 69 / 176

PREVENTIVE MAINTENANCE PROCEDURE
CHALLENGER Series II Bulletin No. PH4
Maintenance Point
Frequency Interval
Procedure Information
Clean away old grease, dirt or lint and apply a fresh coat of 10 wt. non-detergent oil (M&R Part No. 7017000) to the
print carriage stroke cylinder (Tol-O-Matic band cylinder) on each print station.
Weekly
Tools required: 1 - M&R Part No. 7017000 10 Wt. non-
detergent oil
1 - Cloth wiper (shop towel)
61
The frequency of the following preventive maintenance procedure is
based on a 8 hour daily production shift or 40 hour work week.
CAUTION!
To prevent possible injury
to personnel and/or damage to the
equipment, lock out and tag the electri-
cal service and compressed air supply
to this equipment. Refer to pages 55
and 56 of this manual for information
regarding lock out/tag out procedures.
CAUTION!
1. Using a suitable wiper of cloth shop towel remove the old
oil from the outside surface of the print carriage stroke cylin-
der on each print station. Using a cloth wiper, apply 10 wt.
non-detergent oil along the length of each stroke cylinder.
Only a small amount of oil is required. Excessive application
of oil will only serve to attract lint and other air borne conta-
minant’s to the stroke cylinder surface.
Apply oil along bottom cylinder surface.