1
www.KlusDesign.com
MOD-TEK-100 - mounting instructions
*
The full range of accessories and electronics is available at www.KlusDesign.com
**
Use screws suitable for the type of panel selected.
NOTE!
All LED strips must be connected to a 12 V or 24 V power supply.
IMPORTANT:
Not all possible mounting procedures are presented here. More mounting
procedures and related accessories can be found at www.KlusDesign.com. Drawings of profiles
and accessories in these instructions are simplified and only approximate the actual shapes
(Ref. 18061)
(Ref. 18053)
1.1
1.2
2.1.
1.3
2.2.
4.
5.
8.
9.
6.
7.
11.
10.
12.
3.
13.
1.1
RAM-TEK-100 profile (item 1.1)
1.2
RAM-TEK-100 profile (item 1.1)
1.3
Spring (item 1.3)
2.1
OMODO-100 profile (item 2.1)
2.2
Locking bolt
3.
Drywall screw
**
4.
End cap for item 1.1
*
5.
LED tape
*
6.
Gland
*
7.
Power supply (12 V / 24 V)
*
8.
End cap for item 2.1
*
9.
Bolt
*
10.
Wedge
*
11.
Cover
*
12.
Silicone cord
*
13.
Mounting tool for springs 1.3
*
