Mack M359 Скачать руководство пользователя страница 117

Страница: 117 / 332

DRIVING ENVIRONMENT

DRIVER INFORMATION DISPLAY

4 Press Enter.
The majority of the instrument cluster is

turned off. In the instrument cluster, only

the Speedometer and Tachometer are

illuminated. In the DID, only the bottom

portion displays.

5 Press any steering wheel control

button to illuminate the entire instrument

cluster and DID.
6 Press Enter to uncheck the Black

Panel check box. This step turns the

Black Panel option off.

Brightness

To change the Brightness setting in the

Driver Information Display (DID),

complete the following:
1 From the DID Home screen, press the

Options button on the right-hand side of

the right steering stalk.
2 From the Options menu, scroll to the

Display submenu.
3 From the Display submenu, scroll to

Brightness.

4 Press Enter.
The Brightness adjustment screen

displays.

5 Use the Toggle button to raise or lower

the brightness level.
6 Press Enter to set the brightness level.
The Brightness level stays at the

selected level even if the vehicle is

turned off and restarted.

Speed

To change the Speed setting to either

MPH (miles per hour) km/h (kilometers

per hour) in the Driver Information

Display (DID), complete the following:
1 From the Options menu, use the

Toggle button to scroll to Speed.

107

X Publication_PC28

Содержание M359













































































































































































































































































































































Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды

Mack M359, Руководство пользователя

Результаты поиска

Содержание M359

Отзывы:

Похожие инструкции для M359

Бренды по названию

Популярные бренды