Lucent Technologies Metropolis DMXplore, Руководство по установке

Страница: 273 / 330

Installing Fiber Connectors and LBOs LBOs
...........................................................................................................................................................................................................................................................
C - 3 365-372-334 R2.0
Issue 4, November 2004
LC-type LBO Metropolis
®
DMXplore utilizes Lucent’s state-of-the-art AllWave
ADVANTAGE™ Fiber Optic Attenuators. These attenuators reduce
optical power from the transmitter that can result in over-saturation of
the receiver, have low reflection to meet stringent system requirements,
and are backward-compatible with existing transmission systems.
Unique to the AllWave ADVANTAGE optical connectivity solution
(OCS), the new LC™ optic attenuators are designed to provide flat
spectral loss across the full spectrum, allowing the attenuators to be
used in the 1300 nm, 1400 nm, and 1500 nm bands.
Figure C-2 LC-type LBO
...........................................................................................................................................................................
Assembly of LC-type LBO
into LC Block
The LC-type LBOs are installed into the LC-type connector by aligning
the alignment key with the slot in the connector port and pushing the
LBO into the port until it snaps into place.
Figure C-3 LC-type LBO inserted into LC-type Connector Port
...........................................................................................................................................................................
ALIGNMENT KEY
SNAP-ACTION TAB
ALIGNMENT
SLOT
15 dB LBO