Lucent Technologies Metropolis DMXplore, Руководство по установке

Страница: 184 / 330

...........................................................................................................................................................................................................................................................
Software Download and Circuit Pack Installation Circuit Pack Firmware Version Verification
5 - 1 8 365-372-334 R2.0
Issue 4, November 2004
............................................................................................................................................................................................................................................................
Circuit Pack Firmware Version Verification
Description This section provides instructions verifying that firmware versions on
the circuit packs in the Metropolis
®
DMXplore shelf. The procedures in
this section assume that the SYSCTL is installed and software has been
successfully downloaded and the circuit packs have been installed in
the shelf as described in the preceding sections.
...........................................................................................................................................................................
Circuit Pack Firmware
Version Verification
Procedure
Step 1 Log on to the Metropolis
®
DMXplore shelf using the CIT software as
described in the Use of WaveStar® CIT Software (page 5-8).
...........................................................................................................................................................................
Step 2 Use the scroll bar in the Command Builder window to scroll down to
the
rtrv-eqpt
command.
...........................................................................................................................................................................
Step 3 Click on the rtrv-eqpt command.
Result:
A command similar to the following example should be
displayed in the command window to the left of the Send button.
Example:
rtrv-eqpt:LT-DMXPLORE:all:1;
...........................................................................................................................................................................
Step 4
Click
Send
to issue the command.
Result: The Response Window will display an output similar to
the following:
rtrv-eqpt:LT-DMXPLORE:all:1;
LT-DMXPLORE 93-10-26 16:42:11
M 1 COMPLD
"main-1::TYPE=OC-3/16DS1,APP=VLNC6,CLEI=,ECI=,SLN=,VRSN="1.0.1"
"main-2::TYPE=OC-3/16DS1,APP=VLNC6,CLEI=,ECI=,SLN=,VRSN="1.0.1"
"sysctl::TYPE=SYSCTL,APP=VLNC1,SSN=S1-1,CLEI=,ECI=,SLN=,VRSN=1.0.0”
"shelf::TYPE=DMXplore,APP=,CLEI=,ECI=,SLN="
;