Loepfe YarnMaster Zenit, Инструкция по эксплуатации

Страница: 38 / 83

38 ZENIT
BASE SETTINGS
F Mode
The display area of the Foreign Matter Class window can be
selected:
ƒ
Dark / Bright
The “dark” and the “bright” area of the
class window will be displayed (classification of all foreign
matter).
ƒ
Dark The “dark” area of the class window will be dis-
played (classification of dark foreign matter in the bright
yarn).
Cut Retries
If it is not possible to cut the thread, the spindle is blocked
after the set number of cut repetitions. The maximum fault
length (80 m) is suctioned off the cone.
DFS Threshold / F Bright Var / F Dark Var
This information is to be used exclusively by service techni-
cians or trained personnel.
Configuration Codes
!
The configuration code may be changed only in
agreement with LOEPFE. The incorrect setting of
the configuration code can have serious conse-
quences for the clearer function!
After a factory reset or software update, the settings have to
be checked and possibly adapted to the old settings.
Note : It is recommended to copy to USB flash drive and ar-
chive all settings, before a factory reset or a software update!