Liquid Controls CENTRILOGiQ LCR.iQ Скачать руководство пользователя страница 19

Страница: 19 / 125

LCR.iQ - Setup and Operations Manual

Get the latest PDF manual:

https://www.lcmeter.com/resources/technical/manuals

Mobile/online version of this manual:

https://www.lcmeter.com/manuals

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment, not expressly approved by Liquid Controls

could void the user’s authority to operate the equipment.

This device complies with the ISED Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may

cause undesired operation.

Cet appareil est conforme à la norme RSS exempte de licence d'ISED Canada. L'opération

est sous réserve des deux conditions suivantes: (1) Cet appareil ne doit pas causer

d'interférences; et (2) Cet appareil doit accepter toute interference fonctionnement indésirable

de l'appareil CAN ICES-3(B)/NMB-3(B)

This device could automatically discontinue transmission in case of absence of information to

transmit or operational failure. Note that this is not intended to prohibit transmission of control

or signaling information or the use of repetitive codes where required by the technology.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the

potential for harmful interference to co-channel mobile satellite systems.

High power radars are allocated primary users (i.e. priority users) of the bands 5250-

5350MHz and 5650-5850MHz and that these radars could cause interference and or damage

to the Wi-Fi transceiver.

This equipment complies with the FCC/IC radiation exposure limits set forth for an uncontrolled

environment.

Only antennas specified by Liquid Controls shall be used with this equipment.

The antenna for this equipment shall be installed and operated to maintain a separation

distance of 20 cm or greater between the antenna and any person.

Содержание CENTRILOGiQ LCR.iQ






























































































































Результаты поиска

Содержание CENTRILOGiQ LCR.iQ

Отзывы:

Похожие инструкции для CENTRILOGiQ LCR.iQ

Бренды по названию

Популярные бренды

Liquid Controls CENTRILOGiQ LCR.iQ, Руководство по установке и эксплуатации

Результаты поиска

Содержание CENTRILOGiQ LCR.iQ

Отзывы:

Похожие инструкции для CENTRILOGiQ LCR.iQ

Бренды по названию

Популярные бренды