Lexmark M5155, Руководство пользователя

Страница: 189 / 321

Use To
Timeouts
Standby Mode
Disabled
1–240
Specify the number of minutes of inactivity before the printer
enters a lower power state.
Note: 15 is the factory default setting.
Timeouts
Sleep Mode
Disabled
1–120
Set the amount of time the printer waits after a job is printed before
it goes into a reduced power state.
Notes:
• 30 is the factory default setting.
•
Disabled appears only when Energy Conserve is set to Off.
•
Lower settings conserve more energy, but may require
longer warm
‑
up times.
• Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print
with minimum warm
‑
up time.
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Set the printer to operate at a low power state.
Notes:
• When the Hibernate Timeout timer expires, the printer uses
Ethernet connection to check the value of “Hibernate
Timeout on Connection.”
• If “Hibernate Timeout on Connection” is set to “Do Not
Hibernate,” then the printer never automatically hibernates.
•
If “Hibernate Timeout on Connection” is set to “Hibernate,”
then the printer follows the Hibernate Timeout value, except
when it is set to Disabled.
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Set the printer to follow the setting of “Hibernate Timeout” even
when an active Ethernet connection exists.
Notes:
•
“Do Not Hibernate” is the factory default setting.
•
If “Hibernate Timeout on Connection” is set to “Do Not
Hibernate,” then the printer never automatically hibernates.
• If “Hibernate Timeout on Connection” is set to “Hibernate,”
then the printer follows the value of the “Hibernate
Timeout” setting, except when it is set to Disabled.
Timeouts
Screen Timeout
15–300 sec
Set the amount of time in seconds the printer waits before
returning the display to a ready state.
Note: “30 sec” is the factory default setting.
Understanding the printer menus 189