Lexmark M5155 Скачать руководство пользователя страница 221

Страница: 221 / 321

•

Make sure there is adequate clearance around the printer.

•

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage:

Damage to the printer caused by improper moving is not covered by the printer

warranty.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Maintaining the printer

221

Содержание M5155


































































































































































































































































































































Результаты поиска

Содержание M5155

Отзывы:

Похожие инструкции для M5155

Бренды по названию

Популярные бренды

Lexmark M5155, Руководство пользователя

Результаты поиска

Содержание M5155

Отзывы:

Похожие инструкции для M5155

Бренды по названию

Популярные бренды