Lexmark M5155, Руководство пользователя

Страница: 107 / 321

Notes:
• The paper size is automatically set according to the position of the paper guides in each tray except the
multipurpose feeder.
• The paper size for the multipurpose feeder must be set manually from the Paper Size menu.
•
The paper type must be set manually for all trays that do not contain plain paper.
Configuring Universal paper settings
Universal paper size is a user
‑
defined setting that lets you print on paper sizes that are not preset in the printer menus.
Notes:
• The smallest supported Universal size is 70 x 127 mm (2.76 x 5 inches) for one
‑
sided printing and
105 x 148 mm (4.13 x 5.83 inches) for two
‑
sided (duplex) printing.
• The largest supported Universal size is 216 x 356 mm (8.5 x 14 inches) for one
‑
sided and two
‑
sided printing.
•
When printing on paper less than 210 mm (8.3 inches) wide, the printer prints at a reduced speed to prevent
damage to the fuser.
1
From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select a unit of measure
2
Touch Portrait Width or Portrait Height .
3
Select the width or height, and then touch Submit .
Loading the 250
‑
or 550
‑
sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Pull out the tray.
Notes:
• When loading Folio
‑
, legal
‑
, or Oficio
‑
size paper, lift the tray slightly and then pull it out.
• Do not remove trays while a job prints or while
Busy
appears on the display. Doing so may cause a jam.
Using M5170 107