Lexmark 13B0500, Руководство пользователя

Страница: 85 / 234

3
Connect the DSL filter cable to an active telephone wall jack.
2
3
1
Connecting to a PBX or ISDN system
If you use a PBX or ISDN converter or terminal adapter, then follow these steps to connect the equipment:
1
Connect one end of the telephone cable that came with the printer to the printer LINE port .
2
Connect the other end of the telephone cable to the port designated for fax and telephone use.
Notes:
•
Make sure the terminal adapter is set to the correct switch type for your region.
•
Depending on the ISDN port assignment, you may have to connect to a specific port.
•
When using a PBX system, make sure the call waiting tone is off.
•
When using a PBX system, dial the outside line prefix before dialing the fax number.
•
For more information on using the fax with a PBX system, see the documentation that came with your PBX
system.
Connecting to a distinctive ring service
A distinctive ring service may be available from your telephone service provider. This service allows you to have
multiple telephone numbers on one telephone line with each telephone number having a different ring pattern.
This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, follow
these steps to connect the equipment:
1
Connect one end of the telephone cable that came with the printer to the printer LINE port .
2
Connect the other end of the telephone cable to an active analog telephone wall jack.
3
Change the Distinctive Rings setting to match the setting you want the printer to answer:
a
From the printer control panel, press .
b
Press the arrow buttons until
Settings
appears, and then press .
c
Press the arrow buttons until
Fax Settings
appears, and then press .
Faxing
85