Workflow
3-3
3.4
Workflow
3.4.1
Enable Security
You can enable security on the controller. After you enable security, you
have the option to create secure virtual drives using a security key.
There are three procedures you can perform to create secure virtual
drives using a security key:
•
Create the security key identifier
•
Create the security key
•
Create a pass phrase (optional)
See
Section 4.5, “Selecting Full Disk Encryption Security Options”
for the
procedures used to enable security in WebBIOS or
Section 8.2,
“Selecting Full Disk Encryption Security Options”
fo r the procedures
used to enable security in MegaRAID Storage Manage r.
3.4.1.1
Create the Security Key Identifier
The security key identifier appears whenever you enter the
security key. If you have multiple security keys, the identifier
helps you determine which security key to enter. The controller
provides a default identifier for you. You can use the default or
enter your own identifier.
Security Key
A key based on a user-provided string. The controller uses the security key
to lock and unlock access to the secure user data. This key is encrypted
into the security key blob and stored on the controller. If the security key is
unavailable, user data is irretrievably lost. You must take all precautions to
never lose the security key.
Un-Authenticated Mode
This mode allows controller to boot and unlock access to user configuration
without user intervention. In this mode, the security key is encrypted into a
security key blob, stored on the controller, but instead of a user passphrase,
an internal key specific to the controller is used to create the security key
blob.
Volume Encryption Keys
(VEK)
The controller uses the Volume Encryption Keys to encrypt data when a
controller-encrypted virtual disk is created. These keys are not available to
the user. The firmware (FW) uses a unique 512-bit key for each virtual disk.
The VEK for the VDs are stored on the physical disks in a VEK blob.
Option
Description
Содержание ThinkServer RD230
