Lenovo ThinkServer RD230, Руководство пользователя программного обеспечения

Страница: 236 / 364

6-28 MegaRAID Storage Manager Overview and Installation
2. Modify the
/etc/init.d/snmpd
file and change
SNMPDCONF=/etc/snmp/snmpd.conf
entry to
SNMPDCONF=/etc/snmpd.conf
.
3. Run ThinkServer SNMP rpm .
6.6.2 Installing and Configuring an SNMP Agent on Solaris
This section explains how to install and configure SAS SNMP Agent for
the Solaris operating system. To install and configure SNMP for Solaris,
perform the procedures described in the following sections:
– Section 6.6.2.1, “Prerequisites”
– Section 6.6.2.2, “Installation SNMP on Solaris”
–
– Section 6.6.2.4, “Starting, Stopping, and Checking the Status of
the ThinkServer SAS SNMP Agent”
– Section 6.6.2.5, “Configuring snmpd.conf”
– Section 6.6.2.6, “Configuring SNMP Traps”
– Section 6.6.2.7, “Uninstalling the SNMP Package”
6.6.2.1 Prerequisites
This package requires that you have Solaris System Management Agent
installed on the Solaris machine.
6.6.2.2 Installation SNMP on Solaris
To install SNMP for Solaris, perform the following procedure:
Step 1. Unzip the ThinkServer SAS SNMP Agent package.
Step 2. Run the install script by executing the following command:
# ./install.sh
Note: The installation will exit if there are any existing versions of
storelib and sassnmp installed on the Solaris machine.
Section 6.6.2.3, “ThinkServer SAS SNMP MIB Location”