Lenovo ThinkServer RD230, Руководство пользователя программного обеспечения

Страница: 207 / 364

Diagnostic-Related Options 5-37
A port can contain a single PHY or can contain multiple PHYs. A narrow
port contains a single PHY, and a wide port contains multiple PHYs.
5.15 Diagnostic-Related Options
The commands in this section are used to run diagnostic tests.
5.15.1 Start Controller Diagnostics
Use the command in Table 5.64 to start the controller diagnostic for a set
amount of time.
5.15.2 Start Battery Test
Use the command in Table 5.65 to start the battery test. This command
requires a system reboot.
5.15.3 Start NVRAM Diagnostic
Use the command in Table 5.66 to start the controller NVRAM diagnostic
for a set amount of time. This option is for DOS only.
Table 5.63 Display PHY Connection Information
Convention
MegaCli –PHYInfo -phyM –aN|-a0,1,2|-aALL
Description Displays PHY connection information for physical PHY M on the controller(s).
Table 5.64 Start Diagnostics Setting
Convention
MegaCli –AdpDiag [val] –aN|-a0,1,2|-aALL
Description Sets the amount of time for the controller diagnostic to run.
Table 5.65 Start Battery Test
Convention
MegaCli –AdpBatTest –aN|-a0,1,2|-aALL
Description Starts the battery test. This command requires that you turn off the power to the
system, and then turn on the power and reboot the system.