Lenovo ThinkServer RD230, Руководство пользователя программного обеспечения

Страница: 208 / 364

5-38 MegaRAID Command Tool
5.16 Miscellaneous Options
The commands in this section are used to display various information.
5.16.1 Display the MegaCLI Version
Use the command in Table 5.67 to display the version number of the
MegaCLI utility.
5.16.2 Display Help for MegaCLI
Use the command in Table 5.68 to display help information for the
MegaCLI utility.
Table 5.66 Start NVRAM Diagnostic
Convention
MegaCli –AdpNVRAM {-Read|-Write -ffilename}|–Clear
[-StartOffset 0xXXXX] [-EndOffset 0xXXXX] aN
Description Starts the NVRAM diagnostic.
-Read
: Reads the content in NVRAM and writes the data to file filename.
-Write
: Reads data from file filename and writes to NVRAM.
-Clear
: Writes 0 to NVRAM at the specified range from start offset to end offset.
-StartOffset/-EndOffset
: Specifies the start offset and/or end offset in NVRAM.
If you do not use the
-StartOffset
and
-EndOffset
options, the default
StartOffset
is 0 and the default
EndOffset
is the end of actual NVRAM size.
Table 5.67 Display MegaCLI Version
Convention
MegaCli –v
Description Displays the version number of the MegaCLI utility.
Table 5.68 Display Help for MegaCLI
Convention
MegaCli –h|–Help|?
Description Displays help for the MegaCLI utility.