Lenovo ThinkServer RD230, Руководство пользователя программного обеспечения

Страница: 289 / 364

Changing Adjustable Task Rates 8-37
If you selected Make Global Hotspare , skip this step and go to
step 5 . The hot spare will be available to any virtual drive on a
specific controller.
5. Click Go to create the hot spare.
The drive state for the drive changes to hot spare.
8.4 Changing Adjustable Task Rates
Follow these steps if you need to change the adjustable rates for
rebuilds, and other system tasks that run in the background:
Note: It is recommended that you leave the adjustable task rates at
their default settings to achieve the best system
performance. If you raise the task rates above the defaults,
foreground tasks will run more slowly and it may seem that
the system is not responding. If you lower the task rates
below the defaults, rebuilds and other background tasks
may run very slowly and may not complete within a
reasonable time. If you decide to change the values, record
the original default value here so you can restore them
later, if necessary:
Rebuild Rate: ____________
Background Initialization (BGI) Rate: ____________
Check Consistency Rate: ____________
1. Select the Physical View tab in the left panel of the MegaRAID
Storage Manager window, and select a controller icon.
2. In the right panel of the MegaRAID Storage Manager window, select
the
Operations tab, and select Set Adjustable Task Rates .
The default task rates appear in the right panel, as shown in
Figure 8.29 .