Lenovo ThinkServer RD230, Руководство пользователя программного обеспечения

Страница: 239 / 364

Installing and Configuring an SNMP Agent 6-31
– # arguments: community
– # [default|hostname|network/bits] [oid]
– # rwcommunity snmpclient 172.28.157.149
– #################################################
3. Start the SMA service by using the following command:
# svcadm enable svc:/application/management/sma:default
Note: Refer to the command
man snmpd.conf
for more
information about configuring the
snmpd.conf
file.
6.6.2.6 Configuring SNMP Traps
To receive SNMP traps, perform the following steps:
#/etc/init.d/ThinkServer_mrdsnmpd stop
2. Edit the
/etc/ThinkServer_mrdsnmp/sas/sas_TrapDestination.conf
– #################################################
– # Agent Service needs the IP addresses to sent trap
– # The trap destination may be specified in this file
# or using snmpd.conf file. Following indicators can
# be set on "TrapDestInd" to instruct the agent to
– # pick the IPs as the destination.
– # 1 - IPs only from snmpd.conf
– # 2 - IPs from this file only
– # 3 - IPs from both the files
– #################################################
– TrapDestInd 2
– #############Trap Destination IP##################
– 127.0.0.1 public
– 172.28.157.149 public
– #################################################
1. Stop the ThinkServer SAS SNMP Agent by using the following command:
file and add the ipaddress as shown in the following excerpt: