Lenovo System x3650 M4 HD Скачать руководство пользователя страница 710

Страница: 710 / 1168

CIM Information

Prefix:

PLAT

ID:

0146

User Response

1. Make sure the air baffles/heat sink are placed and correctly installed; and make sure the node

cover is installed and completely closed.

2. Make sure the fans are operating, and there are no obstructions to the airflow.

3. Reduce the Ambient temperature. The system must be operating within the specifications (see

Features and specifications for more information).

•

806f0a0c-2013ffff : An Over-Temperature Condition has been detected on the

[PhysicalMemoryElementName] on Subsystem [MemoryElementName]. (DIMM 19)

This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Detected.

May also be shown as 806f0a0c2013ffff or 0x806f0a0c2013ffff

Severity

Error

Serviceable

Yes

Automatically notify support

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0146

User Response

1. Make sure the air baffles/heat sink are placed and correctly installed; and make sure the node

cover is installed and completely closed.

2. Make sure the fans are operating, and there are no obstructions to the airflow.

3. Reduce the Ambient temperature. The system must be operating within the specifications (see

Features and specifications for more information).

•

806f0a0c-2014ffff : An Over-Temperature Condition has been detected on the

[PhysicalMemoryElementName] on Subsystem [MemoryElementName]. (DIMM 20)

This message is for the use case when an implementation has detected an Over Temperature Condition
for Memory that has been Detected.

May also be shown as 806f0a0c2014ffff or 0x806f0a0c2014ffff

698

Lenovo System x3650 M4 HD Installation and Service Guide

Содержание System x3650 M4 HD

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M4 HD

Отзывы:

Бренды по названию

Популярные бренды

Lenovo System x3650 M4 HD, Инструкция по установке и обслуживанию

Результаты поиска

Содержание System x3650 M4 HD

Отзывы:

Бренды по названию

Популярные бренды