Lenovo System x3650 M4 HD Скачать руководство пользователя страница 592

Страница: 592 / 1168

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0144

User Response

1. Check the IBM support website for an applicable retain tip or firmware update that applies

to this memory error.

2. Swap the affected DIMMs (as indicated by the error LEDs on the system board or the event

logs) to a different memory channel or microprocessor.

3. If the error still occurs on the same DIMM, replace the affected DIMM.

4. (Trained technician only) If the problem occurs on the same DIMM connector, check the DIMM

connector. If the connector contains any foreign material or is damaged, replace the system
board.

5. (Trained technician only) Remove the affected microprocessor and check the microprocessor

socket pins for any damaged pins. If a damage is found, replace the system board.

6. (Trained technician only) Replace the affected microprocessor.

•

806f050c-2006ffff : Memory Logging Limit Reached for [PhysicalMemoryElementName] on

Subsystem [MemoryElementName]. (DIMM 6)

This message is for the use case when an implementation has detected that the Memory Logging Limit
has been Reached.

May also be shown as 806f050c2006ffff or 0x806f050c2006ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Yes

Alert Category

Warning - Memory

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0144

User Response

1. Check the IBM support website for an applicable retain tip or firmware update that applies

to this memory error.

2. Swap the affected DIMMs (as indicated by the error LEDs on the system board or the event

logs) to a different memory channel or microprocessor.

3. If the error still occurs on the same DIMM, replace the affected DIMM.

580

Lenovo System x3650 M4 HD Installation and Service Guide

Содержание System x3650 M4 HD

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M4 HD

Отзывы:

Бренды по названию

Популярные бренды

Lenovo System x3650 M4 HD, Инструкция по установке и обслуживанию

Результаты поиска

Содержание System x3650 M4 HD

Отзывы:

Бренды по названию

Популярные бренды