Lenovo System x3650 M4 HD Скачать руководство пользователя страница 397

Страница: 397 / 1168

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0490

User Response

1. Make sure the air baffles/heat sink are placed and correctly installed; and make sure the node

cover is installed and completely closed.

2. Make sure the fans are operating, and there are no obstructions to the airflow.

3. Reduce the Ambient temperature. The system must be operating within the specifications.(see

Features and specifications for more information)

•

80010701-0c01ffff : Numeric sensor [NumericSensorElementName] going high (upper non-critical)

has asserted. (Ambient Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has asserted.

May also be shown as 800107010c01ffff or 0x800107010c01ffff

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0490

User Response

1. Make sure the air baffles/heat sink are placed and correctly installed; and make sure the node

cover is installed and completely closed.

2. Make sure the fans are operating, and there are no obstructions to the airflow.

3. Reduce the Ambient temperature. The system must be operating within the specifications.(see

Features and specifications for more information)

Appendix A. Integrated management module II (IMM2) error messages

385

Содержание System x3650 M4 HD

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3650 M4 HD

Отзывы:

Бренды по названию

Популярные бренды

Lenovo System x3650 M4 HD, Инструкция по установке и обслуживанию

Результаты поиска

Содержание System x3650 M4 HD

Отзывы:

Бренды по названию

Популярные бренды