LAWO edge, Руководство пользователя

Страница: 74 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 74 / 154
1.
2.
3.
Option 1: Using Source IP-Based Assign Mode
If the Assign Mode is set to SrcIpBased , then the Video/Audio/Meta Stream 0 IP Range (Primary) and (Secondary) fields
show the automatically-generated IP ranges. These are based on the media port source IPs (as described above).
To push all of the multicast addresses to the IP senders, click on Trigger Event beside the Assign all multicast (Src IP
based) field. Addresses outlined in red are pushed to the primary network and those in blue are pushed to the secondary
network. If you need to check the source IPs, then this can be done from the Network Ports tab. The screenshots below
show the steps.
Option 2: Using Custom Assign Mode
If the Assign Mode is set to Custom , then you must manually define the IP Start values for each stream essence. In this
instance:
Set the Assign Mode to Custom .
Enter an IP Start value for the Video streams, Audio streams and Meta streams. In each case, you must enter values for
both the primary (red) and secondary (blue) networks.
Click on
Trigger Event beside the Assign all multicast (Use Custom Ranges) field to push all of the addresses to the IP
senders. The screenshots below show the steps.