LAWO edge, Руководство пользователя

Страница: 84 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 84 / 154
The six menu tabs provide access to the settings.
The General tab is divided into two sections with general information about the processing blade (on the left) and other
settings (on the right). Here you will find information such as the Software Version and Serial Number (important for
licensing), plus the "Identify Hardware" function (if you need to locate a blade in the equipment rack). The three Edit
buttons allow you to edit the Device Info (label and location), the Application (operating mode), or the Device Options (SDI I/
O configuration).
The Network Ports tab lists all of the processing blade's active network ports. From here you can check the status of a port
or edit its network settings.
The Senders and Receivers tabs list the processing blade's senders and receivers. The senders and receivers are pre-
defined, where each one handles the three essence types of an SDI I/O: 1 x Video, 4 x Audio, 1 Meta(data). The total
number is determined by the SDI I/O configuration. For example, 24 s 24 receivers for a fully-licensed processing
blade. From this tab, it is possible to adjust the I/O Routing (for the audio streams), edit the streaming parameters or access
the SDP data. In addition, the "Show Sidebar" button (on the right) reveals the available properties for the selected sender
or receiver. For example, for an audio essence, you can adjust the delay or turn on the test tone.
The SDI I/O tab can be switched between SDI Inputs and SDI Outputs . It provides a quick overview of the connections
including signal present (for Video and Audio), and which options are enabled (Frame Sync, Ident, Test Pattern,
Gearboxing). The "Show Sidebar" button (on the right) reveals the available properties for the selected input or output. For
example, for an SDI input, you can turn on the ident and test pattern, or adjust the gearboxing and input frame sync (if the
relevant licenses are active).
The Advanced tab provides access to ALL of the available parameters for a processing blade. It is designed for technical
users who need access to more advanced settings and informational fields.
Connecting and Disconnecting Streams
The "Stream Routing" page is used to manage all the network's streaming connections. From here you can connect a
sender to a receiver, or interrogate the existing connections. The operation is identical for all devices on the HOME
network, and so the same steps apply to all devices known to HOME and not just .edge. The screenshot below shows an
example.