LAWO edge, Руководство пользователя

Страница: 27 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 27 / 154
•
•
•
•
◦
◦
◦
•
◦
◦
3.7 .edge - Rear I/O Plates
At the rear of the frame are the I/O plates (up to 4 per frame). Each plate is equipped with 48 x HD-BNC (for SDI interfacing)
+ 5 x HD-BNC (for external synchronization).
SDI Interfacing
Each rear I/O plate is equipped with 48 x HD-BNC for SDI interfacing.
Available SDIs
The number of available SDIs is determined by the number of ".edge_sdi" licenses (on the processing blade).
When a processing blade is ordered using the ".edge_gateway" part number, it comes with a rear I/O plate and a single
".edge_sdi_inc" license (to enable 16 SDI interfaces). This can be expanded by adding either one or two ".edge_sdi" licenses
(to
enable 32 or 48 SDI interfaces). Thus, there are three licensing options for each blade:
Base system (1 x .edge_sdi_inc license is included) = 16 x SDI .
Option 1 (adds 1 x .edge_sdi license) = 32 x SDI .
Option 2 (adds 2 x .edge_sdi licenses) = 48 x SDI .
Configuration Presets
In each case, the user can choose one of three presets to determine the number of SDI inputs versus outputs. This provides
nine possible configurations for each blade/plate:
Base system (16 x SDI)
Preset 1 = 8 in + 8 out
Preset 2 = 4 in + 12 out
Preset 3 = 12 in + 4 out
Option 1 (32 x SDI)
Preset 1 = 16 in + 16 out
Preset 2 = 8 in + 24 out
The rear I/O plates are hot-pluggable and so it is possible to add or replace a plate while the frame is powered.
See Fitting a Rear I/O Plate for instructions.
