LAWO edge, Руководство пользователя

Страница: 83 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 83 / 154
•
•
•
•
1.
2.
3.
Identifying the .edge Devices
Each .edge processing blade appears as a separate device. So, if you connect all 4 processing blades (from a single frame),
then HOME displays these as 4 separate entries.
By default, the blades are assigned a default label: .edge_Slot1 to .edge_Slot 4 , where slot 1 is the master processing blade
(fitted to the highest physical slot in the frame).
If a processing blade does not appear, or shows as Offline , then check that it is powered and connected to the HOME
server network.
If a processing blade is showing as
Quarantined , then it must be approved before you can continue. To learn more,
please see HOME - Approve or Quarantine a Device (in the HOME - User Manual).
If you need help identifying each processing blade, then you can use the "Identify Hardware" function.
The label and location of each processing blade can be edited using the "Edit Device Info" function.
Adjusting Settings
All of the settings for a processing blade can be viewed and edited from the "Device Details" page. This is opened and
closed as follows.
Click on the device label (from the main "Devices" list) - the "Device Details" page opens with the General tab selected.
Use the menu tabs to access the other subpages: Network Ports , Senders , Receivers , etc.
To return to the main "Devices" list, click on the < Devices button (to the left of the device label).
The HOME Web UI can operate in either light or dark mode: click on the "brightness" icon (top right) to toggle the
view.
The Filters button can be used to filter the contents of the list. For example, to view only the devices in a particular
location.
For more information about these, and other features of HOME, please see HOME - Operating Principles (in the
HOME - User Manual).
