LAWO edge, Руководство пользователя

Страница: 102 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 102 / 154
1.
2.
3.
Configuration via HOME
To configure the audio de-embedding (and embedding) you will need to open the I/O Routing page for either the senders
(or receivers). This is done as follows.
From the main "Devices" list, click on the processing blade label (to open the "Device Details" as described earlier).
Select the Senders tab (to configure the de-embedding) or the Receivers tab (to configure the embedding).
Select the audio sender (or receiver) you wish to adjust and select the I/O Routing button.
The I/O Routing page is used to connect the IP channels of the senders and receivers to the audio channels of the SDI
inputs and outputs. The operation is very similar to the "Signal List" display on Lawo's mc
2
consoles.
To make a connection, select a source (on the left) and a destination (on the right); then click Connect . The screenshots
below show an example.
Open I/O Routing for Audio Sender
Default I/O Routing is 1:1
I/O Routing Adjusted (to swap channels 2 and 3)