LAWO edge, Руководство пользователя

Страница: 44 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 44 / 154
5.4 .edge - Fitting the Optical Transceivers
In order to connect a processing blade to the network, it must be fitted with the correct optical transceivers. These must be
Lawo-certified (as
described earlier).
Overview
The optical transceivers are hot-pluggable, so they can be fitted or exchanged while the device is powered.
When fitting modules of different types (e.g. SFP, SFP28 & QSFP28), take care not to mix up the modules. The image below
shows an example of an optical transceiver.
SFP Installation
Before fitting or removing a transceiver, please read and observe the following important safety information.
•
•
•
(E) CAUTION
This equipment may use Class 1 Laser products. It emits invisible laser radiation that may lead to eye injury.
Never look directly into optical components or optical fibre cables.
Keep optical components closed by protection plugs when unused.
For your safety connect all fibre cables first before turning on the equipment.
•
•
•
(F) ATTENTION
Cet équipement peut utiliser des produits laser de classe 1. Il émet un rayonnement laser invisible qui peut entraîner des
lésions oculaires.
Ne regardez jamais directement dans les composants optiques ou les câbles à fibres optiques.
Gardez les composants optiques fermés par des bouchons de protection lorsqu'ils ne sont pas utilisés.
Pour votre sécurité, connectez d'abord tous les câbles à fibres optiques avant d'allumer l'équipement.
•
•
•
(E) IMPORTANT NOTE
Before removal, please unlock the transceiver to avoid mechanical damage to the slots.
If a transceiver is removed, please refit the device's dust cap to protect the internal components.
When fitting an optical transceiver, you must use the correct fiber type for your remote device. Using the wrong
fiber type, or exceeding the maximum optical input power, can result in a malfunction of, or damage to, the
device.