LAWO edge, Руководство пользователя

Страница: 91 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 91 / 154
•
•
•
•
•
•
•
•
•
Receiver Information
The following information is displayed for each receiver. This is similar to the information for senders but adds
the
Connected Source column (to show the connected stream).
Label - identifies the receiver within the network. For .edge it is pre-defined and cannot be edited.
Essence - describes the type of content that can be received: Video, Audio or Metadata. For audio streams, you will
see the number of channels (once a connection is made).
Redundancy - shows the redundancy status of the receiver. A DualRedundant receiver can be connected to either a
redundant or non-redundant stream.
Media Interface - shows the name of the network interface(s) used by the receiver.
Status - indicates the status of the receiver. Hover over the icon to reveal more information.
Connected Source - shows the name of the connected stream (once a connection is made).
Stream Information - shows a summary of the connected stream parameters. e.g. for a video stream: the IP standard
and video format; for an audio stream: the IP standard, sample rate, codec type and packet time.
Video Receiver Properties
For a video receiver, there is a choice of two switching modes: either Make Before Break (MBB) or Break Before Make
(BBM) .
Audio Receiver Properties
For an audio receiver, the following properties can be adjusted:
Switching Behaviour - either Make Before Break (MBB) or Break Before Make (BBM) as above. To achieve clean
switching for audio streams, MBB is recommended.
Audio Delay - on/off and delay time adjustment (in ms or samples).