LAWO edge, Руководство пользователя

Страница: 28 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 28 / 154
◦
•
◦
◦
◦
•
•
•
•
•
Preset 3 = 24 in + 8 out
Option 2 (48 x SDI)
Preset 1 = 24 in + 24 out
Preset 2 = 16 in + 32 out
Preset 3 = 32 in + 16 out
12G-Capable SDIs
While all connectors provide full support for SD, HD, 3G and 12G signals, the number of simultaneous 12G streams is
defined by the bandwidth of the network interfaces. This means that, in the current release, there is a limit on the number
of 12G-capable SDI inputs and outputs:
Base system : up to 4 x 12G-SDI .
Option 1 license : up to 8 x 12G-SDI .
Option 2 license : up to 12 x 12G-SDI .
The 12G- capable inputs and outputs are indicated by a solid connector in the connectivity diagrams below. To connect a
12G-SDI signal, there are two possibilities:
Connect a single-link 12G-SDI signal to a solid connector (1, 5, 9, etc.) and leave the other three connectors in the block
unused.
Or, if using 3G UHD gearboxing, connect the 4 x 3G-SDI signals to a quad-link block: 1-4, 5-8, 9-12, etc. This option
requires a ".edge_gbox" license for each quad-link instance.
In both cases, if you wish to add input frame synchronization, you will need to purchase 4 x input frame sync licenses for
each 12G instance.
Connectivity
The table below describes the rear I/O plate connectivity for each license option and configuration preset.
SDI Interfacing Bundle Active Licenses (on
Blade) Available SDIs (on Rear I/
O) SDI in/out option (for Rear I/O)
Base system
(comes as standard)
1 x .edge_sdi 16 x SDI
Option 1
(adds 1 x .edge_sdi
license)
2 x .edge_sdi 32 x SDI
Option 2
(adds 2 x .edge_sdi
licenses)
3 x .edge_sdi 48 x SDI
*Solid connectors indicate 12G-
capable inputs and outputs.
Q: Why do the connector numbers jump from 12 to 37?
A : On each rear I/O plate, the top row of connectors is directional and the bottom row is bi-directional. This means that, for
example, the thirteenth connector on the top row can only ever operate as an SDI output.