LAWO edge, Руководство пользователя

Страница: 93 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 93 / 154
•
•
•
•
•
7.4 .edge - SDI Inputs and Outputs
This topic describes how to check and configure the SDI inputs and outputs.
Overview
The SDI I/O tab can be switched between SDI Inputs and SDI Outputs . It provides a quick overview of the connections
including signal present (for Video and Audio), and which options are enabled (Frame Sync, Ident, Test Pattern,
Gearboxing). The
"Show Sidebar" button (on the right) reveals the available properties for the selected input or output. For
example, for an SDI input, you can turn on the ident and test pattern, or adjust the gearboxing and input frame sync (if the
relevant licenses are active).
From the main "Devices" list, click on the processing blade label (to open the "Device Details" as described earlier ). Select
the SDI I/O tab and then either SDI Inputs or SDI Outputs .
SDI Inputs
SDI Inputs (input properties)
SDI Input Information
The following information is displayed for each input:
Physical Input - identifies the SDI connection.
Video - if signal is present, then you will see a green LED and the detected format.
Audio - if signal is present, then you will see a green LED for each audio channel.
Frame Sync - shows On if the input frame synchronizer is enabled.
Ident - if the video ident is turned on, then you will see a warning triangle and the ident text.