LAWO edge, Руководство пользователя

Страница: 95 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 95 / 154
•
•
•
•
•
•
•
•
•
◦
◦
◦
•
SDI Output Information
The following information is displayed for each SDI output. This is similar to the information for inputs but adds the Audio
Tone Test Pattern column (to show the status of the audio test tone).
Physical Output - identifies the SDI connection.
Video - if signal is present, then you will see a green LED and the detected format.
Audio - if signal is present, then you will see a green LED for each audio channel.
Frame Sync - shows On if the output frame synchronizer is enabled.
Ident - if the video ident is turned on, then you will see a warning triangle and the ident text.
Test Pattern - if the video test pattern is turned on, then you will see a warning triangle and the test pattern mode.
Audio Tone Test Pattern - if the audio test tone is turned on, then you will see a warning triangle in this column.
3G to 12G Gearbox - shows On if video gearboxing is enabled.
SDI Output Properties
The following properties can be adjusted by selecting an SDI output and revealing the Properties sidebar. The operations
are similar to the inputs side except for a few additions: the
Audio Test Tone , SMPTE352 options and Number of Audio
Groups .
SDI Outputs Preset - defines the mode of the SDI output blocks: 25-28, 29-32, 33-36, etc. Choose Auto to set the
mode automatically (according to the incoming IP signal). The other options can be used to force the mode as follows:
SD/HD/3G - the outputs will operate as four independent SDIs.
UHD Single Link - the four outputs are configured to output a single-link 12G signal. The signal must be connected
to the first connector of the SDI block: SDI 25, 29, 33, etc.
UHD Quad Link - the four outputs are configured to output a quad-link 12G signal. In this mode, the Gearbox option
is turned on. Note that this option is hidden if there is no gearbox license.
IP Receiver Mode - shows the mode of the IP receiver.