LAWO edge, Руководство пользователя

Страница: 70 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 70 / 154
•
•
6.7 .edge - SDI Configuration
This topic describes how to change the SDI I/O configuration of a processing blade.
Overview
There are two variables that determine the SDI configuration of a processing blade and rear I/O plate: the number of active
SDI licenses and the SDI I/O configuration preset.
By default, every processing blade includes a single license (16 x SDI) and is set to configuration preset 1 (8 inputs, 8
outputs). If additional ".edge_sdi" licenses are available, then the total number of SDI interfaces can be
increased.
Licensing Information
The .edge_sdi software license enables 16 x SDI interfaces on the rear I/O plate.
Each .edge_gateway processing blade comes with a single .edge_sdi_inc license (for 16 x SDIs). The number of SDIs can be
expanded by adding one or two .edge_sdi licenses (for 32 or 48 x SDIs).
Licensing Requirements:
1 x .edge_sdi_inc license is included (per blade).
Up to 2 x .edge_sdi licenses can be added (per blade).
License Activation
All of the licensed features are managed using the License Configuration options ( in HOME's Advanced parameters ). Please
follow the steps to upload and fetch the license(s).
Unlocking the Additional SDIs
If additional SDI licenses are available, then use the Additional SDI parameter ( in the License Configuration page) to
increase the total number of I/O.
Changing the SDI I/O Configuration Preset
Once the Additional SDI parameter is defined, the I/O configuration preset can be changed from either the General or
Advanced tab. How to use the General tab is shown below.
Changing the SDI I/O Configuration Preset