LAWO edge, Руководство пользователя

Страница: 65 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 65 / 154
•
•
•
1.
2.
3.
4.
•
•
Once the processing blade comes back online, the new operating mode can be easily checked from HOME's General tab.
SDI Interfacing
The following parameters define the SDI I/O configuration of the processing blade. There is one informational field ( SDI
Block Available ) and two adjustable parameters ( Additional SDI and SDI I/O configuration ).
SDI Block Available - shows the number of additional SDIs, based on the number of available ".edge_sdi" licenses.
Additional SDI - can be used to activate the additional SDIs (if more than one license is available).
SDI I/O configuration - defines the number of SDI inputs versus outputs.
Note that if you change the Additional SDI value, then this must be pushed to the processing blade before you can select a
valid SDI I/O configuration . So, to change the number of SDIs, the complete workflow is as follows:
Edit the Additional SDI parameter.
Push the change to the processing blade: click on TAKE Configuration Changes -> Trigger Event .
After the reboot, edit the SDI I/O configuration parameter.
Push the change to the processing blade: click on TAKE Configuration Changes -> Trigger Event .
Once the processing blade comes back online, the new I/O configuration can be easily checked from the HOME's SDI I/O
tab.
3G UHD Gearboxing
From the Gearbox License Assignment sub-page, you can assign the video gearboxing licenses to the SDI I/Os.
License Configuration → Gearbox License Assignment
Firstly, there are two informational fields that show the license usage:
Number Available Gearbox - shows the number of available ".edge_gbox" licenses.
Number Unassigned - shows the number of unassigned licenses.
After a change of operating mode, a processing blade reboots to load the new configuration. Note that this can
take up to 6 minutes (as the change of mode forces a change of FPGA). 